Our experienced team is dedicated to providing you with the best solution for your vehicle security needs. If you’re looking to secure your vehicle, look no further. Contact us today to learn more about our Reaper Immobiliser and range of trackers and dashcams and how they can benefit you.
Make 4 interest-free payments of £99.75. No fees & no credit check.
Along with upgraded Ambarella CPU, F200 PRO provides FHD resolution on both front & rear cam, Super Night Vision and Time Lapse during Parking mode to provide continuous recording at 2fps, plus ADAS and safety camera alerts to help keep you safe.
High definition video quality
CMOS Image Sensors allow constant front and rear view Full 1080p resolution during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.
Energy saving parking recording
Energy saving mode will reduce power consumption by 1/2 and gives 2x longer video recording than normal parking mode. When you are away for a vacation or leaving your car for quite some time, energy saving parking recording is a recommended solution.
The Thinkware Dash Cam F200 PRO will go to sleep in Energy Saving Mode. Soon after an impact has been detected by a built-in G-sensor, the dash cam will wake up within a second and start recording for next 20 seconds of period.
Super Night Vision
Dash cam Videos recorded in a low light environment such as dark alleyway or underground parking lot may not be clearly identifiable. SUPER NIGHT VISION uses ISP (Image Signal Processing) technology and the real-time image processing function to record clear, visible video in a low light environment when the vehicle is parked.
*Requires Hardwiring Cable and installation for Parking mode (professional installation recommended)
Time Lapse
Important clips and images may get deleted due to insufficient memory space during long continuous recordings especially in standard parking recording mode which requires large memory for saving 15 to 30 frames per second.
TIME LAPSE MODE in the F200 PRO records 2 frames per second reducing the size of the video file. This allows video recordings in parking mode to continue up to 10 times longer than the motion detection recording.
*Requires Hardwiring Cable and installation for Parking mode (professional installation recommended)
Advanced Driver Assistance System (ADAS)
*Optional GPS antenna required for F200 PRO
The THINKWARE DASH CAM F200 PRO is equipped with the Lane Departure Warning System (LDWS), Front Collision Warning System (FCWS), Urban Front Collision Warning System(uFCWS) and Front Vehicle Departure Warning (FVDW) to ensure driver safety with an audible alert.
Lane Departure Warning System (LDWS)
Drowsy or distracted driving greatly increases the chance of an accident on the road. The Lane Departure Warning System will alert the driver when the vehicle goes off lane in a speed over 50 km/h.
Front Vehicle Departure Warning (FVDW)
Accidents can be avoided by maintaining a safe following distance. Road Safety Warning System in the F200 PRO calculates the real-time distance between your vehicle and the vehicle in front of you, while driving above 30 km/h in expressways or under 30 km/h in a busy city, and issues a 3-level early warning to the driver depending on the danger of collision.
Forward Collision Warning System (FCWS/ uFCWS)
When your car is stopped at an intersection or in traffic, the intelligent guidance system informs you that the vehicle in front has started to move, preventing a delayed response just in case you stop looking ahead.
Safety Camera Alert
Along with Optional GPS antenna THINKWARE DASH CAM F200 PRO provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras. Cultivate safe driving habits with Thinkware Dash Cam.
State of the art video enhancement technology
THINKWARE DASH CAMs are equipped with top-notch video enhancement technology on the market ensuring the most vivid video recordings under any circumstance.
Wide dynamic range
When you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in frontal light exposure levels can result in excessively bright or dark recordings. The WDR function eliminates excessively bright spots on the recording to correct its color balance in order to ensure a clear image.
Night time picture quality correction
Images from the videos recorded during nighttime driving on dark streets are generally difficult to make out. The enhancement Sensors of THINKWARE DASH CAMs come with a standard function of brightness and color control as well as noise cancellation.
Automatic exposure
A sudden rise of light exposure caused by strong sunlight or headlight beams of oncoming vehicle may cause difficulties to assess the situation. Also, lack of lighting in a dark tunnel or night driving may pose the same problem. The automatic light exposure function controls the level of light exposure to maintain vivid and clear video recordings in all circumstances.
Thinkware Dash Cam Link
Your smartphone and the F200 PRO can be connected via the exclusive application, THINKWARE DASH CAM LINK. Check download or delete recorded images, and configure dash cam settings.
PC Viewer
The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you an easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
Comprehensive driving data through GPS
With the optional GPS Tracker, the THINKWARE DASH CAM F200 PRO can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area by providing you with the vehicle speed and the time of a collision, and the severity of impact. The video recording feature not only stores driving footages in case of an event, but it can also be used to track your holiday travel routes.
High temperature protection system
The specially designed heat discharge construction and the built-in thermal sensor protects the device and its data against intense heat by automatically turning it off to prevent overheating.
All Reaper dashcams come with a hardwire fitting kit that is professionally installed to hide all unsightly wiring. Each dashcam will work when your ignition is turned on and naturally turn off when it’s off.
With the POWER MAGIC BOX you can set a timeframe you want the camera to record for when the ignition is turned off. For example, we set our Reaper vans for an additional 5 hours after the vehicle is off each day.
Make 4 interest-free payments of £99.75. No fees & no credit check.
With its 1080p Sony Exmor CMOS Sensor The F100 Dash Cam is available in three different version according to your needs.
This version has the internal rear camera included.
HIGH DEFINITION VIDEO QUALITY
CMOS Image Sensors allow constant Full 1080p HD resolution recording during both daytime and nighttime.
RIOUS AUTONOMOUS RECORDING MODES
Various Recording Modes and Automatic Switch between Modes
Continuous Recording Mode
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
Incident Recording Mode
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
Manual Recording Mode
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
PC VIEWER
The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you easy and convenient viewing of your recorded videos. Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record. You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
COMPREHENSIVE DRIVING INFORMATION WITH GPS
With the optional GPS Tracker, the THINKWARE DASH CAM F100 can record the vehicle’s driving speed and provide its precise location and routes identification on the map. The GPS Tracker helps you to accurately assess the details of the surrounding area by providing you with the vehicle speed and the time of a collision, and the severity of an impact. The video recording feature not only stores driving footages in case of an event, but it can also be used to track your holiday travel routes.
* The video recording feature is only available when using the GPS Tracker accessory sold separately.
Technology & Reliability
Super Capacitor
Advanced Video Clear Technology
Thermal Protection Mode
The thermal sensor triggers the self-protection mechanism to shut down the device under extreme temperatures.
PC Viewer
Video play back, complete access to the device setting and GPS information with an integrated user interface for Windows only.
Formatting memory card and updating firmware is also just a few clicks away.
F100 Information:
Resolution Full HD 1080P
Camera Sensor Sony Exmor CMOS 2.12MP
Viewing Angle 135°
Dimensions (WxDxH) 78 x 34 x 31.5mm
Weight 131g
Frame Rate 30fps
GPS with optional external GPS antenna
Recording Capacity F100 : HD : 30fps
16GB SD Card 124 min
32GB SD Card 248 min
64GB SD Card 496 min
With its 1080p Sony Exmor CMOS Sensor FHD Front camera, this entry-level unit has upgraded optics for superior day & night vision. It also features Safety Camera Alerts when connected to an external GPS antenna, providing drivers with regularly updated information on verified speed camera locations and known mobile speed traps.
All Reaper dashcams come with a hardwire fitting kit that is professionally installed to hide all unsightly wiring. Each dashcam will work when your ignition is turned on and naturally turn off when it’s off.
With the POWER MAGIC BOX you can set a timeframe you want the camera to record for when the ignition is turned off. For example, we set our Reaper vans for an additional 5 hours after the vehicle is off each day.
Make 4 interest-free payments of £99.75. No fees & no credit check.
The Q800 Pro’s 2K QHD Front & Rear DashCam is 4x more powerful than an HD Dash Cam
The Q800 Pro features a 2K QHD front-facing camera and a 1080p Full HD rear-facing camera.
Quad HD (2560×1440) 4x more vivid than HD resolution, 1440P QHD captures every little detail you may have missed before
The Q800 Pro also incorporates Super Night Vision 2.0, a night image correction feature in addition to Thinkware’s Cloud features, built-in A-GPS and Safety Camera Alerts.
FRONT AND REAR VIEW FULL HD RECORDINGS
The Q800 Pro’s Image Sensors allow constant front 2K QHD resolution recording during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.
SUPER NIGHT VISION 2.0
DASH CAM videos recorded in a low-light environment, such as dark alleys or parking lots, may not be clearly identifiable.
SUPER NIGHT VISION2.0 in the Q800 PRO uses Image Signal Processing (ISP) technology to record a clear, visible video in any situation- while driving or parked.
SONY EXMOR R STARVIS IMAGE SENSOR
Perfect image processing even in low-light environments.
The Sony Exmor R STARVIS Image Sensor applied to the Q800 PRO provides rich colours and the optimal resolution.
STARVIS technology improves Exmor R’s low light sensitivity by providing optimal image quality in visible ray and near-infrared range, allowing clear imaging in low light environments.
ENERGY SAVING PARKING RECORDING
Energy saving parking recording will reduce power consumption by 1/3 less and gives 3x longer video recording than normal parking mode.
When you are away for a vacation or leaving your car for quite some time, energy saving parking recording is a recommended solution.
When in use, Q800 PRO will go to sleep and soon after an impact has been detection by built-in G-senor, Q800 PRO will wake up within a second and start recording for the next 20 seconds of the period.
TIME LAPSE
Important clips and images may get deleted due to insufficient memory space during long continuous recordings, especially in standard parking recording mode which requires large memory for saving 15 to 30 frames per second.
TIME LAPSE MODE in the Q800 PRO records 2 frames per second reducing the size of the video file. This allows video recordings in parking mode to continue up to 16 times longer than other dash cams.
* Parking recording mode can be activated upon installing the Q800 PRO with the hardwiring cable provided.
CLOUD APP FEATURES REQUIRE INTERNET CONNECTION (WIFI OR HOT SPOT) FOR FEATURES TO WORK.
GEO-FENCING
Geo-Fencing allows drivers to stay alert of the vehicle location. Whether your vehicle goes in/outside of a certain radical area, Q800 PRO will send you a push notification through the mobile app, THINKWARE CLOUD. This is more practical for the parents, rental companies, and for fleet management. The radius can be set by typing the address or by using pinpoint on the mobile app. You may set 20 different radical area with the size from 100m up to 600km.
LOCATE VEHICLE
Locate Vehicle will help drivers to find the vehicle’s current location. Q800 PRO will update its current location in every 10 seconds. Then it will display current location with speed and the heading direction integrated on google map.
DRIVING IMPACT NOTIFICATION
Receive push notification when an impact is detected while driving, Video’s will be uploaded to the cloud for heavy impacts.
In the event of a crash, the alert feature can help the driver to notify others of an emergency situation when the driver is not in the condition to do so. The family or the owner of the car can then remotely check on the situation from their location.
When the car experiences an impact with a g-force level greater than 3g or 4g while driving, the dash cam will automatically send a push notification alert of the impact to the user’s smartphone logged in to the THINKWARE CLOUD app.
A 20 seconds video of the incident (10 seconds before and after the incident) is also saved on the THINKWARE CLOUD server, and a push notification alert of the video is sent to the user, which can be checked later and downloaded from the app.
PARKING INCIDENT NOTIFICATION
Receive push notification when an impact is detected while parked, Video’s will be uploaded to the cloud for heavy impacts.
REMOTE STREAMING
Monitor your vehicle in real time and play back recorded footage on demand.
SAFETY CAMERA ALERT
The Q800 PRO’s internal GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.
RED LIGHT WARNING SYSTEM
SPEED CAMERA WARNING SYSTEM
RED LIGHT & SPEED CAMERA WARNING SYSTEM
AVERAGE SPEED WARNING SYSTEM
MOBILE ZONE WARNING SYSTEM
ROAD SAFETY WARNING SYSTEM
The THINKWARE DASH CAM Q800 PRO is equipped with the Lane Departure Warning System (LDWS), Front Collision Warning System (FCWS), Urban Front Collision Warning System(uFCWS) and Front Vehicle Departure Warning (FVDW) to ensure driver safety with a voice warning.
Lane Departure Warning System (LDWS)
Drowsy or distracted driving greatly increases the chance of an accident on the road.
The Lane Departure Warning System will alert the driver when the vehicle goes off the lane in a speed over 50 km/h.
High Speed / Urban Forward Collision Warning System (FCWS/ uFCWS)
Accidents can be avoided by maintaining a safe following distance. Road Safety Warning System in the Q800 PRO calculates the real-time distance between your vehicle and the vehicle in front of you while driving above 30 km/h in expressways or under 30 km/h in a busy city, and issues a 3-level early warning to the driver depending on the danger of collision.
Front Vehicle Departure Warning (FVDW)
When your car is stopped at an intersection or in traffic, the intelligent guidance system informs you that the vehicle in front has started to move, preventing a delayed response just in case you stop looking ahead.
VIDEO ENHANCEMENT TECHNOLOGY
THINKWARE DASH CAMs are equipped with top-notch video enhancement technology on the market, ensuring the most vivid video recordings under any circumstance.
WIDE DYNAMIC RANGE
When you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in frontal light exposure levels can result in excessively bright or dark recordings.
The WDR function eliminates excessively bright spots on the recording to correct its colour balance in order to ensure a clear image.
NIGHTTIME PICTURE QUALITY CORRECTION
Images from the videos recorded during nighttime driving on dark streets are generally difficult to make out.
The enhancement Sensors of THINKWARE DASH CAMs come with a standard function of brightness and colour control as well as noise cancellation.
AUTOMATIC EXPOSURE
A sudden rise of light exposure caused by strong sunlight or headlight beams of the oncoming vehicle may cause difficulties to assess the situation. Also, the lack of lighting in a dark tunnel or night driving may pose the same problem.
The automatic light exposure function controls the level of light exposure to maintain vivid and clear video recordings in all circumstances.
VARIOUS AUTONOMOUS RECORDING MODES
Various Recording Modes and Automatic Switch between Modes
Continuous Recording Mode
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
Incident Recording Mode
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
Manual Recording Mode
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
Energy Saving Mode
The dash cam will go to sleep and soon after an impact has been detection by built-in G-senor, Q800 PRO will wake up within a second and start recording for next 20 seconds of the period.
CHECK RECORDED IMAGES AND UPDATE FIRMWARE USING SMARTPHONES
Your smartphone and the Q800 PRO can be connected via the exclusive application ‘THINKWARE DASH CAM Mobile Viewer for Q800 PRO’ with built-in Wi-Fi in the navigation. Check, download or delete recorded images, update firmware or update safe driving information on the application.
VIEWER FOR CHECKING CLEAR AND PRECISE VIDEO
The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you an easy and convenient viewing of your recorded videos.
Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record.
You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
COMPREHENSIVE DRIVING DATA THROUGH BUILT-IN GPS
Using the GPS data in Q800 PRO, it can precisely pinpoint the vehicle’s location and routes with its driving speed on the map.
The GPS helps you accurately assess the status of the accident by providing you with the vehicle speed, the direction of the collision and the severity of an impact. The DASH CAM not only records driving footage but can also be used to track and recall past driving routes whether it be work or holiday routes.
HIGH-TEMPERATURE PROTECTION SYSTEM
The specially designed heat discharge construction and the built-in thermal sensor of the Q800 PRO protect the device and its data against intense heat by automatically turning it off to prevent overheating.
All Reaper dashcams come with a hardwire fitting kit that is professionally installed to hide all unsightly wiring. Each dashcam will work when your ignition is turned on and naturally turn off when it’s off.
With the POWER MAGIC BOX you can set a timeframe you want the camera to record for when the ignition is turned off. For example, we set our Reaper vans for an additional 5 hours after the vehicle is off each day.
Make 4 interest-free payments of £99.75. No fees & no credit check.
The Q800 Pro’s 2K QHD Front Only DashCam is 4x more powerful than an HD Dash Cam
The Q800 Pro features a 2K QHD front-facing camera and an optional 1080p Full HD rear-facing camera.
Quad HD (2560×1440) 4x more vivid than HD resolution, 1440P QHD captures every little detail you may have missed before
The Q800 Pro also incorporates Super Night Vision 2.0, a night image correction feature in addition to Thinkware’s Cloud features, built-in A-GPS and Safety Camera Alerts.
FRONT VIEW 2K RECORDINGS
The Q800 Pro’s Image Sensors allow constant front 2K QHD resolution recording during both daytime and nighttime along with a 140-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.
SUPER NIGHT VISION 2.0
DASH CAM videos recorded in a low-light environment, such as dark alleys or parking lots, may not be clearly identifiable.
SUPER NIGHT VISION2.0 in the Q800 PRO uses Image Signal Processing (ISP) technology to record a clear, visible video in any situation- while driving or parked.
SONY EXMOR R STARVIS IMAGE SENSOR
Perfect image processing even in low-light environments.
The Sony Exmor R STARVIS Image Sensor applied to the Q800 PRO provides rich colours and the optimal resolution.
STARVIS technology improves Exmor R’s low light sensitivity by providing optimal image quality in visible ray and near-infrared range, allowing clear imaging in low light environments.
ENERGY SAVING PARKING RECORDING
Energy saving parking recording will reduce power consumption by 1/3 less and gives 3x longer video recording than normal parking mode.
When you are away for a vacation or leaving your car for quite some time, energy saving parking recording is a recommended solution.
When in use, Q800 PRO will go to sleep and soon after an impact has been detection by built-in G-senor, Q800 PRO will wake up within a second and start recording for the next 20 seconds of the period.
TIME LAPSE
Important clips and images may get deleted due to insufficient memory space during long continuous recordings, especially in standard parking recording mode which requires large memory for saving 15 to 30 frames per second.
TIME LAPSE MODE in the Q800 PRO records 2 frames per second reducing the size of the video file. This allows video recordings in parking mode to continue up to 16 times longer than other dash cams.
* Parking recording mode can be activated upon installing the Q800 PRO with the hardwiring cable provided.
CLOUD APP FEATURES REQUIRE INTERNET CONNECTION (WIFI OR HOT SPOT) FOR FEATURES TO WORK.
GEO-FENCING
Geo-Fencing allows drivers to stay alert of the vehicle location. Whether your vehicle goes in/outside of a certain radical area, Q800 PRO will send you a push notification through the mobile app, THINKWARE CLOUD. This is more practical for the parents, rental companies, and for fleet management. The radius can be set by typing the address or by using pinpoint on the mobile app. You may set 20 different radical area with the size from 100m up to 600km.
LOCATE VEHICLE
Locate Vehicle will help drivers to find the vehicle’s current location. Q800 PRO will update its current location in every 10 seconds. Then it will display current location with speed and the heading direction integrated on google map.
DRIVING IMPACT NOTIFICATION
Receive push notification when an impact is detected while driving, Video’s will be uploaded to the cloud for heavy impacts.
In the event of a crash, the alert feature can help the driver to notify others of an emergency situation when the driver is not in the condition to do so. The family or the owner of the car can then remotely check on the situation from their location.
When the car experiences an impact with a g-force level greater than 3g or 4g while driving, the dash cam will automatically send a push notification alert of the impact to the user’s smartphone logged in to the THINKWARE CLOUD app.
A 20 seconds video of the incident (10 seconds before and after the incident) is also saved on the THINKWARE CLOUD server, and a push notification alert of the video is sent to the user, which can be checked later and downloaded from the app.
PARKING INCIDENT NOTIFICATION
Receive push notification when an impact is detected while parked, Video’s will be uploaded to the cloud for heavy impacts.
REMOTE STREAMING
Monitor your vehicle in real time and play back recorded footage on demand.
SAFETY CAMERA ALERT
The Q800 PRO’s internal GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.
RED LIGHT WARNING SYSTEM
SPEED CAMERA WARNING SYSTEM
RED LIGHT & SPEED CAMERA WARNING SYSTEM
AVERAGE SPEED WARNING SYSTEM
MOBILE ZONE WARNING SYSTEM
ROAD SAFETY WARNING SYSTEM
The THINKWARE DASH CAM Q800 PRO is equipped with the Lane Departure Warning System (LDWS), Front Collision Warning System (FCWS), Urban Front Collision Warning System(uFCWS) and Front Vehicle Departure Warning (FVDW) to ensure driver safety with a voice warning.
Lane Departure Warning System (LDWS)
Drowsy or distracted driving greatly increases the chance of an accident on the road.
The Lane Departure Warning System will alert the driver when the vehicle goes off the lane in a speed over 50 km/h.
High Speed / Urban Forward Collision Warning System (FCWS/ uFCWS)
Accidents can be avoided by maintaining a safe following distance. Road Safety Warning System in the Q800 PRO calculates the real-time distance between your vehicle and the vehicle in front of you while driving above 30 km/h in expressways or under 30 km/h in a busy city, and issues a 3-level early warning to the driver depending on the danger of collision.
Front Vehicle Departure Warning (FVDW)
When your car is stopped at an intersection or in traffic, the intelligent guidance system informs you that the vehicle in front has started to move, preventing a delayed response just in case you stop looking ahead.
VIDEO ENHANCEMENT TECHNOLOGY
THINKWARE DASH CAMs are equipped with top-notch video enhancement technology on the market, ensuring the most vivid video recordings under any circumstance.
WIDE DYNAMIC RANGE
When you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in frontal light exposure levels can result in excessively bright or dark recordings.
The WDR function eliminates excessively bright spots on the recording to correct its colour balance in order to ensure a clear image.
NIGHTTIME PICTURE QUALITY CORRECTION
Images from the videos recorded during nighttime driving on dark streets are generally difficult to make out.
The enhancement Sensors of THINKWARE DASH CAMs come with a standard function of brightness and colour control as well as noise cancellation.
AUTOMATIC EXPOSURE
A sudden rise of light exposure caused by strong sunlight or headlight beams of the oncoming vehicle may cause difficulties to assess the situation. Also, the lack of lighting in a dark tunnel or night driving may pose the same problem.
The automatic light exposure function controls the level of light exposure to maintain vivid and clear video recordings in all circumstances.
VARIOUS AUTONOMOUS RECORDING MODES
Various Recording Modes and Automatic Switch between Modes
Continuous Recording Mode
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
Incident Recording Mode
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
Manual Recording Mode
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
Energy Saving Mode
The dash cam will go to sleep and soon after an impact has been detection by built-in G-senor, Q800 PRO will wake up within a second and start recording for next 20 seconds of the period.
CHECK RECORDED IMAGES AND UPDATE FIRMWARE USING SMARTPHONES
Your smartphone and the Q800 PRO can be connected via the exclusive application ‘THINKWARE DASH CAM Mobile Viewer for Q800 PRO’ with built-in Wi-Fi in the navigation. Check, download or delete recorded images, update firmware or update safe driving information on the application.
VIEWER FOR CHECKING CLEAR AND PRECISE VIDEO
The intuitive and simple-to-use interface of THINKWARE DASH CAM allows you an easy and convenient viewing of your recorded videos.
Through PC or Mac viewer, you can playback and download recorded videos along with your route history and speed record.
You can also change the dash cam settings, format the memory card, or install updates with just a few clicks on the viewer.
COMPREHENSIVE DRIVING DATA THROUGH BUILT-IN GPS
Using the GPS data in Q800 PRO, it can precisely pinpoint the vehicle’s location and routes with its driving speed on the map.
The GPS helps you accurately assess the status of the accident by providing you with the vehicle speed, the direction of the collision and the severity of an impact. The DASH CAM not only records driving footage but can also be used to track and recall past driving routes whether it be work or holiday routes.
HIGH-TEMPERATURE PROTECTION SYSTEM
The specially designed heat discharge construction and the built-in thermal sensor of the Q800 PRO protect the device and its data against intense heat by automatically turning it off to prevent overheating.
All Reaper dashcams come with a hardwire fitting kit that is professionally installed to hide all unsightly wiring. Each dashcam will work when your ignition is turned on and naturally turn off when it’s off.
With the POWER MAGIC BOX you can set a timeframe you want the camera to record for when the ignition is turned off. For example, we set our Reaper vans for an additional 5 hours after the vehicle is off each day.
Make 4 interest-free payments of £99.75. No fees & no credit check.
The Power magic box gives you the option to leave your dashcam on for a timeframe you set after the car’s ignition is turned off.
So you can set the dashcams to keep recording and adjust yourself as we can fit the device in a handy cubby hole or glovebox.
Ideal for 4G cameras so you can dial in when the car is parked up.
The Power magic box gives you the option to leave your dashcam on for a timeframe you set after the car’s ignition is turned off.
So you can set the dashcams to keep recording and adjust yourself as we can fit the device in a handy cubby hole or glovebox.
Ideal for 4G cameras so you can dial in when the car is parked up.
Make 4 interest-free payments of £99.75. No fees & no credit check.
This new model from Thinkware comes with a low profile and modern design.
The U1000 features a 4K UHD front-facing camera.
CHOOSE HOW YOU RECORD
You decide how your U1000 dash cam records its footage. Choosing from either a higher quality, or a higher framerate.
Option 1: 4K Front Camera 30fps
Option 2: 2K Front Camera 60fps
4K Ultra HD (3840x2160p)
2x more vivid than Full HD (1080p) resolution, 2160p 4K captures every little detail you may have missed before
Cloud App Features: (Car Internet connection required)
Smartphone App (Replay your latest driving videos and manage your dash cam’s settings all in one app!)
Live View (Monitor your vehicle with your smartphone, no matter where you are)
Driving Impact Notification (the dash cam will automatically send a push notification alert of the impact to the user’s smartphone)
Geo-Fencing (If your vehicle goes in/outside of the set area, the U1000 will send you a push notification through the mobile app)
Locate Vehicle (Will display current location with speed and the heading direction integrated on google map)
Safety Camera Alert
The THINKWARE DASH CAM U1000’s internal GPS provides accurate location information while the Safety Camera Alert function is on continuous alert to warn the driver of red lights and traffic enforcement cameras.
Front and Rear view recordings
The U1000’s Image Sensors allow constant front 4K UHD resolution recording during both daytime and nighttime along with a 150-degree wide angle lens view. This will minimize blind spots to assure recording of all events without fail.
Super Night Vision 2.0
videos recorded in a low-light environment, such as dark alleys or parking lots, may not be clearly identifiable.
SUPER NIGHT VISION in the U1000 uses Image Signal Processing (ISP) technology to record a clear, visible video in any situation- while driving or parked.
Wide Dynamic Range
When you are driving under bright sunlight, coming out of a tunnel, or getting under the shadow of a tall building etc, a sudden change in frontal light exposure levels can result in excessively bright or dark recordings.
The WDR function eliminates excessively bright spots on the recording to correct its colour balance in order to ensure a clear image.
Automatic Exposure
A sudden rise of light exposure caused by strong sunlight or headlight beams of the oncoming vehicle may cause difficulties to assess the situation. Also, the lack of lighting in a dark tunnel or night driving may pose the same problem.
The automatic light exposure function controls the level of light exposure to maintain vivid and clear video recordings in all circumstances.
Various Autonomous Recording Modes
Continuous Recording Mode
This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.
Incident Recording Mode
The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.
Manual Recording Mode
Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.
All Reaper dashcams come with a hardwire fitting kit that is professionally installed to hide all unsightly wiring. Each dashcam will work when your ignition is turned on and naturally turn off when it’s off.
With the POWER MAGIC BOX you can set a timeframe you want the camera to record for when the ignition is turned off. For example, we set our Reaper vans for an additional 5 hours after the vehicle is off each day.
Make 4 interest-free payments of £99.75. No fees & no credit check.
Requires Vodafone Smart SIM Subscription for Only +£3.00 Per Month.
All Reaper dashcams come with a hardwire fitting kit that is professionally installed to hide all unsightly wiring. Each dashcam will work when your ignition is turned on and naturally turn off when it’s off.
With the POWER MAGIC BOX you can set a timeframe you want the camera to record for when the ignition is turned off. For example, we set our Reaper vans for an additional 5 hours after the vehicle is off each day.
